Blog / Auto repair in Sterling

How to Repair Car Dents or Scratches

Free Hail Damage Automobile photo and picture

Ted Britt Chevrolet is no stranger to scratches and dents. We sell new and sued vehicles to customers across Sterling, VA, and see Chevys in all conditions. As a leading Chevy dealer , we recommend bringing a dented vehicle in, but sometimes a little elbow grease goes a long way.
It's important to us that our customers trust us. We maintain transparency by giving as much information as we can on vehicle maintenance. Here's the inside scoop on scratch removal for all you DIY lovers out there. 

You leave work after a busy day and your beloved Chevy has a scratch or dent on the tailgate. What do you do? Car scratches are easier to fix than car dents, but both are fixable.

Removing Car Dents

Dent repair is a big job. We recommend bringing it into the shop for a professional finish. These are the steps to take to tackle it yourself.

  1. Clean the area on and around the dent
  2. Use sandpaper (24 grit to start and 80 grit to finish) to send the dent
  3. Lightly sand around the dent (feather the sandpaper outward to blend)
  4. Use wax remover and clean the dent again to lift paint debris
  5. Mix body filler until uniform in color and consistency
  6. Apply filler to the dented area (the first coat should be tight to the vehicle)
  7. Apply a second layer of filler to fill the dent
  8. Sand with 80 to 180 grit sandpaper to smooth
  9. Apply glaze
  10. Sand with 180 to 320 grit sandpaper
  11. Prime the area for paint
  12. Paint the area

Primer and paint are applied with an electrostatic spray gun in a ventilated paint booth. Wear protective clothing, gloves, and eyewear for this process.

Removing Car Scratches

Minor scratches on the clear coat of a car are fixable with a little TLC. Major scratches cutting into the metal frame underneath need a professional. Try a few of these fixes for a minor scratch.

  • Scratch remover: Products like Scratch Doctor and Meguiars remove light scratches and infuse glaze
  • Paint pen: Paint pens come in stock colors and fill scratches with paint
  • Touch-up kit: Sand the scratch with 180 grit sandpaper, apply sandable primer, and spray with automotive touch-up paint and clear coat

Wear safety goggles and gloves while handling scratch repair materials.

Visit Ted Britt Chevrolet

We hope this blog has helped shed some light on DIY fixes for dents and scratches. Ted Britt Chevrolet services all makes and models of Chevys in Sterling. We can help if your Chevy has taken some damage and needs a professional touch. Our team is well-versed in dent repair and scratch removal, and use top-of-the-line automotive tools and paint products. Call us today at 703-835-9744 to learn more or schedule a service appointment with our Sterling auto repair team.

Image courtesy of Pixabay.com

Posted in:

Related Posts

A blue car in a service bay with a man holding a tablet for diagnostics. - Ted Britt Chevrolet Sterling, VA

Timing Belt Replacement: The Key to Your Chevy's Longevity

Your Chevy engine is highly efficient, and its various components work on split-second timing to achieve this performance. The timing belt synchronizes your engine's operation. As your Chevy dealer, we want to tell you more about the importance of this belt and some signs you need a timing belt replacement. more From Your Chevy Dealer: When Do You Need a Timing Belt Replacement? Why the Belt Is Important The timing belt is made from tough, reinforced rubber and connects the camshaft at the top of your engine to the crankshaft at the bottom of your engine. It moves through the grooves between the sections, ensuring that the engine intake and exhaust valves open and close at precise intervals. The engine intake valves allow the fuel-air mixture into the cylinders and the exhaust valves allow the gases and residue from combustion to enter the exhaust system. Even slight timing delays can cause engine problems. Intake valves that open too early can draw in a fuel-air mixture that hasn't been mixed precisely, and your engine will use too much fuel. In contrast, if the exhaust valves open too early, the fuel-air mixture in the cylinders won't be sufficiently compressed, and your engine will lose power. When Do You Replace the Belt? On average, a timing belt needs replacement every 60,000 to 100,000 miles. The correct replacement time for your Chevy's timing belt is listed in your car handbook. The belt needs replacement as even reinforced rubber becomes less flexible and can crack. The heat inside the engine will cause any crack to widen and deepen, and the belt could break. Signs You Need a New Belt Misfiring Misfiring is caused by the fuel-air mixture in a cylinder igniting incorrectly. The mixture must be fully compressed before it's ignited to enable it to burn in a carefully controlled series of explosions. Efficient compression can only occur in an airtight engine cylinder. As we saw above, if your engine timing is out of sync, a cylinder may open too early. Increased airflow into the cylinder will cause the cylinder to misfire. Ticking Noises If you hear an odd ticking sound from the engine, it's a sign your belt needs replacement. The timing belt turns the crankshaft pulleys as it moves, but a worn belt won't move them fast enough, resulting in the ticking sound. Check Engine Light Sensors are connected to every important component to ensure they're working correctly. An older, worn timing belt can overheat, and if it gets hot enough it can snap. This immediately causes your engine to stop and sustain damage in the process. The sensors will identify the damaged belt and inform your computer, and the engine light will illuminate. Visit our service department today at Ted Britt Chevrolet in Sterling, VA, and our technicians will check your timing belt and replace it if necessary.

Close up photo of a vehicle's braking pads. - Ted Britt Chevrolet Sterling, VA

Regular Brake Inspections: Keeping Your Chevy Safe

Your brakes are your Chevy's most important safety system, giving you full control over your speed. This is essential, as most accidents can be prevented if you stop in time. Brake components wear out over time, preventing your brakes from working efficiently. As your Chevy dealer, we want to give you a few signs you need to visit us for a brake inspection. more Signs You Need a Brake Inspection at Your Chevy Dealer Brake Fluid Leak Brake fluid is essential for your braking system, providing the hydraulic power that forces the brakes to work. When you hit the brakes, the pressurized fluid is forced through the brake hoses to the brake calipers. It forces the pins out of the calipers, causing them to clamp against the rotors. The brake pads inside the calipers create friction against the rotors and this stops your wheels. The fluid can leak from a rusted brake line, worn brake hose, or damaged seal. It's very difficult to spot a leak, as the fluid is thin and slightly yellowish, so it usually blends with the ground. You'll feel the lack of fluid as the brake pedal becomes less responsive. Our technicians will trace and seal the leak then we'll refill your brake fluid. Worn Brake Pads As we saw above, the brake pads force your rotors to a stop by generating friction. Each pad has a 1/2" thick rough material cover. The rotors are smooth and flat, and the reaction of a rough pad to a smooth rotor creates friction. As time passes, the friction material gradually wears off and the thinner material coverings prevent your brakes from working as efficiently as they should. Once a pad's material covering drops to 1/4" thickness, it needs replacement. The pad manufacturers install a metal spike inside the material, which only becomes visible when a pad has worn down. The spike will scratch against the rotor when you brake, producing a high-pitched screeching noise. We can quickly replace the pads and your brakes will work effectively again. Glazed Pads Glazed pads have a material covering that's turned smooth and glass-like. They're dangerous as their smooth surfaces can't produce friction, so a wheel with a glazed pad will continue to turn until brought to a stop by the other wheels. Glazing is caused by intense friction and heat caused by a pad continuously skimming a rotor surface. This can happen if you ride your brakes for long periods. It can also be caused by a damaged caliper that remains partially pressed against its rotor. We can quickly replace glazed pads, and we can repair or replace a damaged caliper if needed. If you have a brake problem, contact us today at Ted Britt Chevrolet in Sterling, VA.

Signs You Need an Oil Change

Get an oil change at Ted Britt Chevrolet with our certified service department and technicians. Your car needs regular maintenance, and that includes oil changes. Understanding when to change the oil at your Chevy dealer can prevent expensive repairs and keep your vehicle running smoothly. When to Change Your Oil Most modern Chevrolet vehicles require fresh oil every 5,000 to 7,500 miles under normal driving conditions. However, this depends on your specific model, year, and the type of oil in your car. If your Chevy is driven in severe conditions, such as frequent towing, carrying heavy loads, or stop-and-go traffic, you should change your oil more frequently. Always refer to the owner's manual for the most accurate recommendations. more Why Oil is Important Oil lubricates the moving parts of your engine, reducing friction and preventing premature wear. Keeping the oil fresh can extend the life of your engine. Oil also helps carry away heat as it circulates through your engine. Over time, old oil becomes less effective at cooling, potentially leading to overheating. You've Passed the Mileage Limit If you've driven more than 7,500 miles since the last time you changed your oil, it's time to schedule that appointment. Even if you haven't driven very much, but your last change was more than six months ago, take some time to evaluate the condition of your oil. Dark and Dirty Oil New oil is amber and transparent enough to let light through. As it gets older, it collects particles from the engine, turning dark, dirty, and thick. Check your oil color and consistency with your dipstick at least once a month to tell if you need a change. Your Engine Is Running Louder Clean oil cushions the parts of your engine so they don't grind together. If you start to hear more noise than usual from your engine, or worse, a knocking sound, the oil isn't doing its job anymore. That sound you hear is damage happening under the hood. Oil Light or Check Engine Light Modern vehicles have sensors and computer systems that monitor oil quality and levels. If the oil light or check engine light comes on, it's time to take a look at your oil, and probably schedule a service appointment. Smoke From the Exhaust Vapor coming from your tailpipe is normal. Smoke is not. Smoke coming from your exhaust means something is burning in your engine, and that something might be oil from a leak. Decreased Fuel Efficiency If you are making more frequent trips to the gas station, your car's oil might be to blame. A well-lubricated engine runs more efficiently, but one with old oil has to work harder, consuming more fuel. Regular maintenance, including changing your oil, is far less expensive than repairing your engine because you neglected it. Call Ted Britt Chevrolet and schedule your next service appointment today.